The Rear Panel - Planet Networking & Communication WDRT-730 User Manual

2.1.3

The Rear Panel

The rear panel provides the physical connectors connected to the power adapter and any other
network devices. Figure 2-3
Rear Panel
Interface
Antenna x 2
Radio ON/OFF Switch the button to activate or deactivate the wireless function.
Reset/WPS
WAN
LAN1-4
Power
shows the rear panel of WDRT-730.
Figure 2-3 Rear Panel
Fixed Dual-Band 3dBi Omni Dipole Antennas.
Reset the WDRT-730 to the factory default (clear all settings) or activate
WPS function.
Press for more than 10 seconds
Press for less than 5 seconds
function.
Press for less than 5 seconds twice
function.
Connect to the Cable/xDSL Modem, or the Ethernet
Connect to the user's PC or network devices
Connect to the power adapter provided in the package
Table 2-2 The Interface indication
User Manual of WDRT-730
Function
to reset the device to factory default.
once to activate 2.4GHz wireless WPS
to activate 5GHz wireless WPS
-10-