DAVIDSEN 623293 Instruction Manual page 29

- Use a spirit level to check that the
awning is straight. If this is not the case,
loosen the lock nuts (A) on each side of
the awning, turn the adjustment screw
(C) until the awning is straight and re-
tighten the lock nuts.
- You can change the angle of the awning
in relation to the wall in the same way.
- Check that the awning is securely
mounted.
Use
- Insert the hand crank in the eye by the
interchange. Turn the hand crank to
unroll or roll up the awning.
- Once the front cross bar touches the
roll, do not try to roll the awning in any
further!
arm
adjustment screw (C)
lock nuts (A)
DK
NO
SE
FI
GB
DE
ET
29