Advertisement
SIGN INSTALLATION & AC POWER CONNECTIONS
SIGN INSTALLATION
1) Slide the unit(s) into your cabinet.
2) Confirm that all Data Cable connections are secure.
3) Finish securing the unit(s) to the cabinet with two self tapping screws (not included),
through the flange.
: It is recommended that the two self tapping screws are secured on each end
NOTE
behind the cabinet face retainer, into the narrow extrusion, to hide the screws.
This will eliminate vibration and secure the unit from sliding back and forth, if
the cabinet is slightly larger than the display.
POWER CONNECTIONS
The ML+ boasts ultra efficient power consumption, using less than 3 amps per unit. The
ML+ requires a 110V AC power source to operate.
1) Connect the outlet plug (included) to a 110VAC wall outlet or splice the plug and hard wire
directly to a 110VAC power source using wire nuts (not included).
: In many cases, existing power can be used, but it is suggested to find the
NOTE
cleanest AC power source available. It is also recommended that a licensed
electrician perform any wiring modifications needed for custom applications.
Always follow local laws and ordinances.
AC Power Plug
Page 4
Advertisement
