4. Attach the 200-pound Resistance Bars (1) to the
Cover Plate (A) with the two Screws (E) removed
in step 3. Make sure the Cover Plate is oriented
with the edges up.
5. Reattach the Cover Plate (A) to the Tray (B) with
the two Button Head Screws (C) removed in step
2. Note: Make sure the decal is over the
removable resistance bars.
6. Make sure that all parts have been properly tightened. To use the MAX PACK to add resistance, refer
to ADJUSTING THE RESISTANCE in the MAX by WEIDER user's manual.
4
A
5
A
Removable
Resistance
B
Bars
5
1
Edges
Up
E
C
Decal