Key Functions; Installation Instructions - Klarstein 10034227 Manual

EN
20

KEY FUNCTIONS

Key
WATER
SMALL/ LARGE
ON/OFF

INSTALLATION INSTRUCTIONS

• During transportation, the incline angle of the cabinet should not be over 45°.
Do not turn the Ice maker upside down. As this may damage the compressor and
sealed system.
• Remove all packing material and carefully check your ice maker to ensure it is in
good condition and that there is no damage to the ice maker or power cord and
plug.
• The Ice maker should be placed horizontally on a level surface. To ensure proper
ventilation for your Ice maker allow 150 mm of space at the top, the back and on
each side. Do not install the Ice maker near an oven, radiator, or any other heat
source.
• Before using the Ice maker for the first time, please wait 2 hours after positioning it,
and keep the front lid open for at least 2 hours.
• Ensure that the voltage indicated on the ice maker corresponds with the voltage in
your home.
• Pure water is not allowed to be used on this unit, spring water is recommended.
• Please always keep the viewing window close during ice making.
Function
Press this button to obtain cold water. The ice function must
first be activated.
Press the small button to make small ice cubes and the large
button to make large ice cubes.
Press this button to turn the machine on or off.