Limited Warranty - Quechua Keymaze 100 Home Manual

4.3.2.3 Setting the backlighting time
In this screen you can set the backlighting time in seconds. Select the gure you want to change by repeatedly
pressing the selection button (SEL) until the required value is selected. To save batteries, you are recommended
to set it to the lowest value.
Hold down the selection (SEL) button to con rm your choice then repeat the procedure for the other gures.
Then hold down the selection (SEL) button again to exit this setting and return to the System settings menu.
4.3.2.4 Setting time before going to standby
In this screen you can set time before the system goes to standby in minutes. Select the gure you want to
change by repeatedly pressing the selection button (SEL) until the required value is selected.
Hold down the selection (SEL) button to con rm your choice then repeat the procedure for the other gures.
Then hold down the selection (SEL) button again to exit this setting and return to the System settings menu.
4.3.3 GPS settings
Select the symbol you have chosen by pressing the selection (SEL) button several times, then con rm your
choice by holding down the selection (SEL) button.
Time and date display:
In the menu you can view
the time and date. They are
provided by the satellite sig-
nal. You can only set them by
changing the time zone as
shown in paragraph 4.3.2.1

5 LIMITED WARRANTY

OXYLANE guarantees the initial purchaser of this product that it is free from defects of material or workmanship. This product
is guaranteed for two years from the purchase date. Please keep your receipt as proof of purchase. The guarantee does not
cover:
• damage resulting from misuse, from a failure to respect the precautions for use, from accidents, from improper maintenance
or from commercial use of the product.
• damage resulting from repairs carried out by persons not authorised by OXYLANE.
• batteries, or casings which are cracked or broken or which show signs of impacts.
• During the warranty period, the item will either be repaired free of charge by an authorised repair service or replaced free of
charge (depending on the distributor).
Please keep your receipt as proof of purchase. Keep these instructions for the entire life of the product.
6 CONTACT US
So that we continue to develop improved products which meet your needs, we are pleased to receive your feedback with
regard to the quality, functionality and usage of our products. www.quechua.com We will reply as soon as possible.
FCC
This equipment complies with section 15 of the FCC Regulation. Its operation is subject to the two following conditions :
1. This equipment has no risk of producing harmful interference.
2. This equipment must accept all interference which occurs, including those which risk producing an undesirable functioning.
This equipment has been tested and certi ed as complying with the limits of Class B numerical apparatus, under the provisions of
Section 15 of the FCC.
Those limitations are imposed to ensure reasonable protection against intrusive interference within a residential installation. This
equipment generates, uses and emits radio energy frequencies and, if it has not been installed in accordance with
the instructions, could provoke harmful interference to radio communications.
However, there is no guarantee that it will produce no interference in any particular installation. If this equipment provokes intrusive
interference with radio or television reception, interference which can be ascertained by the camera o and then switching it on
again, it is recommended that the user take one of the following measures to remedy such interferences:
- Reorientate or move the reception antenna.
- Increase the distance between the apparatus and the receiver.
- Link the equipment to a power supply on a circuit other than the one to which the receiver is linked.
- Seek advice from the vendor or from a radio/television technician.
N.B. Any change or modi cation which has not been expressly authorised by Décathlon is liable to delete the authorisation granted
to the user for the use of the equipment.
6
Starting from cold:
In this menu you can force the
product to perform a complete
satellite search: a cold start. Use
this menu point to restart GPS
signal acquisition. The Keymaze
100 will display a con rmation
symbol for one second and
then return to main navigation
mode
Resetting destinations:
In this menu you can reset the destina-
tions stored in the memory. When you
enter this mode, the Keymaze 100 will
display a con rmation symbol for one
second and then return to main navi-
gation mode. The destination data in
the various memory les are then de-
leted and you will have to reprogram
them before you can travel to them.