Precautions For Use - Quechua Keymaze 100 Home Manual

EN
1 DEVICE AND NAVIGATION SYSTEM DIAGRAM
Main button functions:
1. Screen:
2. Battery cover:
3. Start/Stop:
4. Selection (SEL):
Main mode screen:
75%~100%
2 USAGE AND PRECAUTIONS FOR USE
2.1 Description of normal conditions of use and precautions for use
This Sport GPS can guide its user to one of up to ve positions which can be stored in its memory. Even though it is not
waterproof, it is designed to function in outdoor conditions. It functions using the GPS satellite system, so it can only be used
when the device detects a suitably strong signal. It is therefore not possible to mark a point or be guided when the GPS signal is
not detected. This will usually be the case indoors. Similarly, the GPS signal can be a ected by the weather (cloud cover or snow),
thick vegetation (undergrowth) and an urban environment (narrow streets and high buildings). If the GPS signal is very seriously
a ected, we advise you to choose a di erent route.

2.2 Precautions for use:

Handle the device with care - do not drop it or subject it to strong impacts. Do not take the product apart. This would render
the guarantee null and void and may cause irreparable damage. Do not subject the product to extreme temperatures. If it is
exposed to sunlight for too long, the display may darken temporarily, but will go back to normal once it has cooled down again.
Use only a soft, damp cloth to clean. Do not use detergents, as they could damage the equipment.
2
Displays the GPS signal indicator and battery level, the direction to follow
and the selected point
Open the battery cover by turning it in the direction of the arrow
Short press: Electroluminescence
Long press (2 sec): Turns the product on or o
In settings mode, goes back to the previous screen
Short press: allows you to select or set a point or an option.
Press Start and SEL at the same time: Go to the main menu
This indicator shows whether the Keymaze has xed the GPS signal (indicator displayed
constantly) or not (the symbol is ashing). The product can only be used if the symbol is
steady. Acquisition time varies from 10 seconds to 5 minutes
Indicates the straight-line distance between the current position and the stored position.
If the GPS signal is not xed, the distance is not displayed and is replaced by (--.-)
Indicates the direction to the stored point. The nature of the point is displayed in the middle
of the screen (in this case: home). The arrow will only be indicated if the device detects the
GPS signal and the electronic compass has been correctly calibrated
Battery charge indicator
50%~75% 25%~50% Battery charged down:
it needs to be charged