First Use; Getting Started - Quechua Keymaze 100 Home Manual

2.3 Waterproo ng:
The product is not waterproof. It will resist light rain or sweat, but we advise you to dry it if you notice contact with moisture.

3 FIRST USE

Before using your Keymaze Quechua 100
3.1 Batteries
The product uses two AAA/LR03 batteries. You can use alkaline (1.5V), lithium (1.5V) or rechargeable (NiMH, 1.2V) batteries.
Battery life depends on the quality and type of batteries used. Generally, using alkaline batteries from a reputable brand,
battery life in use is 9 hours. You can of course extend this period by using the energy-saving modes.
Fitting and changing the batteries:
The "crossed-out bin" symbol indicates that this product and the batteries it contains cannot be disposed of
with general household waste. They must be separated and recycled specially. Take the batteries and unusable
electronic products to an authorised collection area for recycling. Recycling your electronic waste in this way will
protect the environment and your health.

3.2 Getting started

Turn the product on by holding the START button down for two seconds (to turn it o , hold the same button down for two
seconds). When using for the rst time of the day, and for more reliable guidance, the product will require you to calibrate
the electronic compass.
To do this now, hold the product horizontally and turn it over slowly until the indicator bar lls totally and the screen
disappears. You usually need to perform two complete turns .
advise you to calibrate the compass outdoors. If the directions indicated are strange or erroneous, start the
calibration procedure again via the settings menu.
3.3 Detecting the GPS signal
In order to function, the Keymaze Quechua 100
turning the device on (the "satellite" symbol ashes), hold it outside, facing the sky, in the clearest space possible until the
satellite symbol is displayed constantly. This indicates that the Keymaze has xed the Global Positioning signal.
The time which this procedure takes varies according to a number of factors. It usually takes from
10 seconds to ve minutes. The factors which in uence acquisition time are:
•The time and distance travelled since the last acquisition (it will rst look for the same satellites it
used last time)
•Geographic and climatic disturbances (clouds, tree leaves, mountains and buildings, for example)
•The user's movement: as far as possible, you should avoid moving the Keymaze at an untimely
moment during this acquisition phase.
If several disturbance factors combine, acquisition may be very slow and the GPS may even not be
able to x the signal at all, making any use impossible.
Home, please follow these instructions:
IMPORTANT:
During the calibration procedure, it is important to move away from any sources or
electromagnetic interference and metal parts (including watches and metal bracelets). We
Home must x the GPS signal from at least four di erent satellites. After
3