Advertisement
Quick Links
XA & XT Model Bicycles
Before using your bicycle for the first time, please take some time to practice proper folding
and unfolding procedures. Proper operation of your bicycle is important for your safety and
enjoyment. With just a bit of practice, you should be able to fold your bicycle in 25 seconds or
less. Be sure to follow the sequence of steps carefully.
Contents
Safety.........................................................................................................................................2
Bicycle Terms ............................................................................................................................2
Unfolding Instructions ..............................................................................................................3
Folding Instructions ..................................................................................................................7
Adjusting the Frame Latch .......................................................................................................8
1
Advertisement
Related Manuals for DAHON Zero G XA
Summary of Contents for DAHON Zero G XA
-
Page 1: Table Of Contents
XA & XT Model Bicycles Before using your bicycle for the first time, please take some time to practice proper folding and unfolding procedures. Proper operation of your bicycle is important for your safety and enjoyment. With just a bit of practice, you should be able to fold your bicycle in 25 seconds or less. -
Page 2: Safety
Safety • Before you ride your bike for the first time, make sure it has been checked and adjusted by a bicycle technician. This will validate your warranty and ensure that your bicycle is optimally adjusted for performance and safety. •... -
Page 3: Unfolding Instructions
Unfolding Instructions STEP 1: Prepare to unfold your bicycle by STEP 2: Unfold the frame by swinging the standing on the side with the chain. front and rear halves of the frame apart. STEP 3: Lock the frame latch lever by STEP 4: Move the frame latch safety hook pushing it in towards the frame. - Page 4 If you have an XA model, follow these steps: STEP 5: Align the stem with the front STEP 6: Tighten the stem bolts by wheel and tighten the star nut bolt. The bolt alternating half turns on the top and bottom should be just tight enough to eliminate play bolts.
- Page 5 If you have an XT model, follow these steps: STEP 5: Flip the QuickFold stem into the STEP 6: Lock the stem into position by riding position. screwing the QuikFold lever in a clockwise direction. STEP 7: Hide the QuikFold lever inside the top cap.
- Page 6 STEP 9: Open the seat post quick release STEP 10: Attach the pedals and tighten lever and raise the saddle to the desired with a 15mm wrench. The right pedal should height. Close the seat post quick release be screwed in clockwise. The left pedal lever.
-
Page 7: Folding Instructions
Folding Instructions To fold your bicycle, simply reverse the steps described on pages 3-6. TIP: For a faster fold on an XA model, there is no need to remove the handlebar - simply loosen the stem and star nut bolts and twist the stem and handlebar 90 degrees to the right. -
Page 8: Adjusting The Frame Latch
Adjusting the Frame Latch Your bicycle should arrive with the frame latch properly adjusted. However, the frame latch will need periodic adjustment to keep it functioning optimally. When properly adjusted, the frame latch will open and close with 5-6 kg. (11-13.2 lbs.) of force and the two halves of the frame hinge will lie flush against each other.