Advertisement
Adjusting the Frame Latch
Your bicycle should arrive with the frame latch properly adjusted. However, the frame latch will
need periodic adjustment to keep it functioning optimally. When properly adjusted, the frame
latch will open and close with 5-6 kg. (11-13.2 lbs.) of force and the two halves of the frame
hinge will lie flush against each other.
WARNING: If you are at all unsure about how to do these adjustments yourself, bring your bike
to your dealer for a professional adjustment.
STEP 1: Determine whether the latch
mechanism needs to be adjusted by
opening and closing the latch a few times.
If the latch requires less than 5-6 kg.
(11-13.2 lbs.) of force to open and close, it
needs to be tightened. If the latch requires
more than 5-6 kg. (11-13.2 lbs.) of force to
open and close, it needs to be loosened.
STEP 2: To tighten the latch, turn
the frame latch bolt counter-clockwise,
threading it out of the nut. To loosen
the latch, turn the latch bolt clockwise,
threading into the nut. Adjust in 1/16
turn increments until the latch is properly
adjusted.
STEP 3: Add a drop of Loc-Tite glue to the
bolt threads to prevent loosening.
STEP 4: Periodically lubricate the lever to
keep it working smoothly.
Warning: Proper adjustment of the frame
latch is critical for safety. If adjusted too
tightly or too loosely, injury to the rider
or permanent damage to the hinges may
result. Please check the frame latch before
every ride.
8
Advertisement
