Related Manuals for TerraMaster D8 Thunderbolt 3
Summary of Contents for TerraMaster D8 Thunderbolt 3
- Page 1 Data Storage Master User Manual D8 Thunderbolt 3 Copyright © 2017 TerraMaster All Rights Reserved.
-
Page 2: Table Of Contents
2. Package List 3. Appearance 4. Hard Disk Installation 5. Hardware Connection 6. Install Driver for Thunderbolt 3 Interface 7. Install Driver for RAID 8. Install RAID Manager Pro 9. Create Disk Array 10. Initialise and Format Disk Array Model:D8 Thunderbolt 3... -
Page 3: System Requirements
After your new D8 is received, please check if the package includes the following articles. If any article is missing, please contact the reseller quickly. Product unit ×1 Power cord ×1 Several screws Installation Guide ×1 Thunderbolt 3 Cable ×1 Model:D8 Thunderbolt 3... -
Page 4: Appearance
If you do, the device may be damaged. DP Port Use this to connect the DP monitor. ⑤ Use this to connect a computer or another Thunderbolt 3 device. Thunderbolt 3 Port ⑥ Model:D8 Thunderbolt 3... -
Page 5: Hard Disk Installation
1.Push the lowest part of the hard drive tray to ensure 2.After insertion, lock the tray in place by pressing the its full insertion; handle. If you do this before full insertion, take-out fails or unstable read-write are likely. 3.The hard drive trayis locked withoutfully inserting it. Model:D8 Thunderbolt 3... -
Page 6: Hardware Connection
Mac or Windows version. Follow the steps below to download and install the RAID driver: 1.Visit the “Download” on TerraMaster’s official website. Choose the relevant product model, and then click “RAID driver” in the list; 2.(For Windows users) Go to Device manager > Other devices > RAID controller. Right-click “Update drive software”, select the 64-bit system files relevant for your computer, and then select “Confirm”. -
Page 7: Install Raid Manager Pro
(either Windows or Mac). Follow the steps below to download and install RAID Manager Pro: 1.Visit the “Download” on TerraMaster’s official website. Choose the relevant product model, and then select RAID Manager Pro from the download list;... -
Page 8: 10. Initialise And Format Disk Array
1.Go to GO > Application Tool > Disk Utility > External; 2.Locate an uninitialized external disk in the menu (this will be the TerraMaster array); 3.Choose external disk, then click “Erase”. Now, fill in the settings in the “Erase” menu, and click “Erase”. Once the erase process is finished, disk array initialisation is complete;... - Page 9 4.If you having difficulties initialising and formatting the array, please see Windows’ help file. After initialisation and formatting, your device is now ready to use. To ask any questions when installing, initialising, or using your device, please get in touch with TerraMaster’s technical support team. Support email: support@terra-master.com...
Need help?
Do you have a question about the D8 Thunderbolt 3 and is the answer not in the manual?
Questions and answers