Table of Contents
Advertisement
Follow these instructions to install an add-on card:
1.
Remove a blanking plate from the system case corresponding to the slot you are going to use.
2.
Install the edge connector of the add-on card into the expansion slot. Ensure that the edge connector
is correctly seated in the slot.
3.
Secure the metal bracket of the card to the system case with a screw.
For some add-on cards, for example graphics adapters and network adapters, you have to
install drivers and software before you can begin using the add-on card.
Follow these instructions to install the M.2 SSD card:
1.
Demount the screw not used according to the length of your M.2 SSD card.
2.
Insert the M.2 SSD card into NGFF slot in the fool-proof way.
3.
Lock the screw as the following picture shows to make sure the M.2 SSD
card is installed in place.
For some add-on cards, for example graphics adapters and network adapters,
you have to install drivers and software before you can begin using the add-on card.
90
* For reference only
Hide quick links:
Advertisement
Table of Contents
