Installing Add-On Cards - Acer Predator PO3-600 E Manual

Installing Add-on Cards

The slots on this motherboard are designed to hold expansion cards and connect them to the system bus.
Expansion slots are a means of adding or enhancing the motherboard's features and capabilities. With these
efficient facilities, you can increase the motherboard's capabilities by adding hardware that performs tasks
that are not part of the basic system.
M2_1 Slot The M.2 (Key E, 2230/1630) slot is for the WLAN/Bluetooth module.
PCIE16X Slot The PCI Express x16 slot is used to install an external PCI Express graphics card that is
fully compliant to the PCI Express Base Specification revision 3.0.
PCIE1X Slot The PCI Express x1 slot is fully compliant to the PCI Express Base Specification revision
3.0.
M2_2 Slot The M.2 (NGFF) (Key M, 2280/2242) slot is for SATA SSD or PCIE SSD and Intel Optane
memory.
Before installing an add-on card, check the documentation for the card carefully. If the card is
not Plug and Play, you may have to manually configure the card before installation.
89