Power Management Function (Acpi Support Function) - Acer Predator PO3-600 E Manual

Table of Contents

Advertisement

Power Management Function (ACPI support function)

Device Standby Mode
l
Independent power management timer for hard disk drive devices
l
(0-15 minutes, time step=1 minute).
l
Hard disk drive goes into Standby mode (for ATA standard interface).
l
Disable V-sync to control the VESA DPMS monitor.
l
Resume method: device activated (Keyboard for Free-DOS, keyboard & mouse for Windows).
l
Resume recovery time: 3-5 sec.
Global Standby Mode
l
Global power management timer (2-120 minutes, time step=10 minute).
l
Hard disk drive goes into Standby mode (for ATA standard interface).
Disable H-sync and V-sync signals to control the VESA DPMS monitor.
l
l
Resume method: Return to original state by pushing external switch button, modem ring in,
keyboard and mouse for APM mode.
l
Resume recovery time: 7-10 sec.
Suspend Mode
l
Independent power management timer (2-120 minutes, time step=10 minutes) or pushing
external
l
switch button.
l
CPU goes into SMM.
l
CPU asserts STPCLK# and goes into the Stop Grant State.
l
LED on the panel turns amber color.
l
Hard disk drive goes into SLEEP mode (for ATA standard interface).
l
Disable H-sync and V-sync signals to control the VESA DPMS monitor.
Ultra I/O and VGA chip go into power saving mode.
l
l
Resume method: Return to original state by pushing external switch button, modem ring in,
keyboard and mouse for APM mode.
l
Return to original state by pushing external switch button, modem ring in and USB keyboard for
ACPI mode.
ACPI
l
ACPI specification 2.0.
l
S0, S1, S3 and S5 sleep state support.
l
On board device power management support.
l
On board device configuration support.
14

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents