Other Convenient Rds Functions And Adjustments - JVC KD-LX110R Instructions Manual

4
Press and hold the number button for
more than 2 seconds to store the PTY
code selected into the preset number
you want.
PTY preset number appears, and selected
code name and "MEMORY" alternate on the
display.
5
Press SEL (select) to finish the setting.
To search your favourite programme type
1
Press and hold PTY (programme type)
for more than 1 second while listening
to an FM station.
PTY
2
Select one of the PTY codes stored
in preset number buttons (1 to 6).
PTY search for your favourite programme
starts after 5 seconds.
• If there is a station broadcasting a programme of
the same PTY code you selected, that station is
tuned in.
• If there is no station broadcasting a programme
of the same PTY code you selected, the station
will not change.
Note:
In some areas, the PTY search will not work correctly.
14
The last selected PTY code
and preset number appear.
Other convenient RDS functions
and adjustments
Automatic selection of the station
when using the number buttons
Usually when you press the number button, the
preset station is tuned in.
However, when the preset station is an RDS station,
something different will happen. If the signals from
that preset station are not sufficient for good
reception, this unit, using the AF data, tunes in
another frequency broadcasting the same
programme as the original preset station is
broadcasting.
In case no other station is tuned in, you can also
search all receivable frequencies for the same
programme (Programme search).
To activate programme search, follow the procedure
below.
• Programme search takes a while.
• See also "Changing the general settings (PSM)"
on page 22.
1
Press and hold SEL (select) for more than 2
seconds so that one of the PSM items appears
on the display.
¢ or 4
2
Press
"P(Programme)-SEARCH."
3
Turn the control dial to select "SEARCH ON."
Now programme search is activated.
4
Press SEL (select) to finish the setting.
To cancel programme search, repeat the same
procedure and select "SEARCH OFF" in step 3 by
turning the control dial counterclockwise.
to select