Hisense RD-30WC4SAW Instruction Manual page 11

6. Remove both adjustable feet and remove
the bottom hinge bracket by unscrewing the
bolts.
7. Unscrew and remove the bottom hinge
pin, turn the bracket over and replace it.
Refit the bracket fitting the bottom hinge pin.
Replace both adjustable feet.Transfer the
lower door to the property position.Secure
the door's level, make the bottom hinge pin
into the lower hole of the door, then tight the
bolts.
8. Make the middle hinge reverse the
direction 180 degree, then transfer it to the
left property position.Make the middle hinge
pin in the upper hole of the lower door, then
tight the bolts. Transfer the upper door to the
property position. Secure the door's level;
make the middle hinge pin into the lower
hole of the upper door.
9. With the reassembled top hinge located in
the hole in the top inside left corner of the
upper door,fix the top hinge
screws. Remove the decorative block of top
cover to the other side.Replace
cover using screws ,replace
hole plugs.
When y ou r evers e the d oor,
P leas e d o t his f irs t:
Move the accessory B from the upper cover
of upper door and fit the accessory A that is
a small detachable part from a small bag.
1.Remove the screw(1) that hold the door
stopper(3),then remove the door stopper(3).
3
Warning!
When changing the side at which the door
opens, the appliance must not be connected
to the mains. Remove plug from the mains
beforehand.
EN
11
using the 3
the top
the circular
2
1