Kurzweil MP15 User Manual page 21

For each of the 16 MIDI channels, you can set the Channel Enable parameter to either Enable
or Disable. For each channel, setting this parameter to Enable enables the channel to transmit
and receive MIDI messages and setting it to Disable disables such functions.
1) Press the [Function] button.
2) Press the [Func -] or [Func +] buttons to step through the parameter list.
3) You can change the parameter value when "Chan1:Enable" is on the LCD.
4) Pressing the [Next] or [Previous] button will select a new 'Channel Enable' value.
5) Pressing both value buttons simultaneously will set this parameter to 'Enable'.
The Destination parameter determines the destination of MIDI data generated by striking keys
or activating controllers. This data can be sent to the piano engine, though the MIDI out ports,
or both. You can set this parameter to any of three destinations.
1) Press the [Function] button.
2) Press the [Func -] or [Func +] buttons to step through the parameter list.
3) You can change the parameter value when "Dest:Local+MIDI" is on the LCD.
4) Pressing the [Next] or [Previous] button will select a new 'Destination' value.
5) Pressing both value buttons simultaneously will set this parameter to 'Local+MIDI'.
Default value : Local+MIDI
Destination : Local+MIDI, Local, MIDI
- Local : Select this to play the piano, but not send any MIDI data to MIDI out port.
- MIDI : Select this to use the piano strictly as a controller for other external modules
in your MIDI chain.
- Local+MIDI : Select this to make use of piano sounds as well as use it as a MIDI controller.
The Bank mode parameter determines the controller number with which MIDI Bank change
messages are transmitted. For MIDI Bank change messages, various manufacturers have
chosen different MIDI controller numbers. Most have chosen 0, 32, or both.
You can set this parameter to any of the following controller IDs:
- Ctl0 : MIDI Bank change messages are sent with controller number 0.
- Ctl32 : MIDI Bank change messages are sent with controller number 32.
- Ctl0/32 : MIDI Bank change messages are sent with controller number 0 and 32.
Default value : 0/32
C h a n 1 : E n a b l e
l
D e s t : L o c a l + M I D I
B a n k S e l : 0 / 3 2
2 1
Functions