Kurzweil MP15 User Manual page 10

3)
Insert the pedal
cord plug to the
pedal jack from
the rear.
1. Place the keyboard on the stand and fit into the holes in the
side panel brackets.
2. Fasten the keyboard to the side panel using screws
3. Fasten the keyboard to the front legs using screws
4. Insert the pedal cable plug into the pedal jack located on the
bottom of the keyboard.
5. Rotate the pedal adjuster until it comes in firm contact with
the floor surface. If the adjuster is not in firm contact with the
floor, the pedals will wobble and may malfunction.
8
1 0
Piano Assembly
.
6
.