Yamaha YFM50S Assembly Manual page 9

EBA00011
NOTE:
_
Check the following items again after setup and predelivery service have been completed.
A: INSTALLATION OF THE PARTS INCLUDED IN THE CRATE
Ã
Front wheels
Ã
Rear wheels
Ã
Handlebar
Ã
Handlebar cover
Ã
Swingarm guard
Ã
Dummy headlights and front bumper
Ã
Front panel
B: TIGHTENING TORQUE OF EACH PART
Ã
Front wheel and front brake drum
Ã
Rear wheel hub and rear axle
Ã
Handlebar holder and steering stem
Ã
Swingarm guard and rear swingarm
Ã
Dummy headlight and front bumper
Ã
Front bumper and front fender
Ã
Front bumper and frame
Ã
Front panel and front fender
C: ROUTING OF WIRE, CABLES, ETC.
Ã
Rear brake cable
Ã
Front brake cable (left)
Ã
Front brake cable (right)
Ã
Throttle cable
Ã
Fuel tank breather hose
D: ADJUSTMENTS
Ã
Checking and charging the battery
Ã
Checking the tire pressure
Ã
Draining the fuel
Ã
Checking the engine oil level
Ã
Checking the final gear oil level
E: FUNCTION AND PERFORMANCE
Ã
Check the function of indicator light.
Ã
Check the brake feeling.
F: ACCESSORIES, ETC. FOR DELIVERY
Ã
Owner's manual
Ã
Owner's tool kit
YFM50S
SETUP AND PREDELIVERY CHECKLIST
Ã
Battery
Ã
Owner's tool kit
Ã
Owner's manual
Ã
Seat
Ã
Front reflectors (for CDN and Europe)
Ã
Rear reflectors (for CDN and Europe)
28 Nm (2.8 m · kg, 20 ft · lb)
70 Nm (7.0 m · kg, 50 ft · lb)
20 Nm (2.0 m · kg, 14 ft · lb)
23 Nm (2.3 m · kg, 17 ft · lb)
7 Nm (0.7 m · kg, 5.1 ft · lb)
7 Nm (0.7 m · kg, 5.1 ft · lb)
23 Nm (2.3 m · kg, 17 ft · lb)
3 Nm (0.3 m · kg, 2.2 ft · lb)
Ã
Negative battery lead
Ã
Positive battery lead
Ã
Battery breather hose
Ã
Neutral indicator light lead
Ã
Adjusting the engine idling speed
Ã
Adjusting the throttle lever free play
Ã
Adjusting the front brake
Ã
Adjusting the rear brake lever
Ã
Check engine for irregular noise. (Yes/No)
Ã
Check for exhaust leak. (Yes/No)
Ã
Low-pressure air gauge
–5–