Table of Contents
Advertisement
AXIS P3235 Network Camera Series
Setup
Left: no focus. Right: remote focus applied.
Left: no zoom. Right: remote zoom applied.
Benefit from IR light in low-light conditions using night mode
Your camera uses visible light to deliver color images during the day. As the available light diminishes, you can set the camera to
automatically shift to night mode, in which the camera uses both visible light and near-infrared light to deliver black-and-white
images. Since the camera uses more of the available light it can deliver brighter, more detailed, images.
1. Go to Settings > Image > Day and night, and make sure that the IR cut filter is set to Auto.
2. Enable Allow IR illumination and Synchronize IR illumination to use the camera's IR light when night mode is activated.
Reduce noise in low-light conditions
To reduce noise in low-light conditions, you can adjust one or more of the following settings:
Note
A high max shutter value can result in motion blur.
•
To slow down the shutter speed, set max shutter to the highest possible value.
•
Reduce sharpness in the image.
•
Set the max gain to a lower value.
10
Advertisement
Table of Contents
