Weed Eater Twist 'N Edge 545186757 Instruction Manual page 7

Height
adjuster
Unlocked
2. Adjust the length of the tube to the most
comfortable operating position.
3. Turn height adjuster in the opposite direc-
tion to lock.
INSTALLATION OF THE WALL
BRACKET
WARNING:
Mount the wall bracket
on a smooth, vertical and internal wall. The
wall chosen must be strong enough to hold
the weight of the bracket and the unit. Choose
a location where the unit and wall bracket are
not likely to be disturbed by children or pass-
ersby.
IMPORTANT!
Unplug the charger from the
electrical outlet before connecting or discon-
necting the trimmer to the wall bracket.
1. Mount the wall bracket in a well ventilated
area between 40_F (5_C) and 78_F
(25_C).
2. There are three mounting holes on the
wall bracket. Position the wall bracket
with the two holes at the top.
Wall Bracket
Mounting
Screw
Holes
3. Ensure that when the trimmer is hung in
the wall bracket, the bottom of the trimmer
is within 4 inches (100 mm) of the ground.
This will make it easier to hang the trim-
mer for charging and will also ensure that
the wall bracket is within easy reach of an
electrical outlet for plugging in the char-
ger.
4. Mount wall bracket securely to the wall
Locked
with the anchors and screws provided.
CAUTION:
trical wires in the wall and penetrating com-
pletely through the wall.
5. Your cordless trimmer can now be attached
to the wall bracket for charging.
Charge
Connector
7
When drilling holes, avoid elec-
Wall Bracket
Charger