Installing The Tv Stand (L40S3D13N); Mounting The Tv To A Wall (L40S3D13N) - Pioneer L40S3D13N Instruction Manual

2
Preparation

Installing the TV Stand (L40S3D13N)

GB
The LCD display is very fragile, and must be protected at all times when installing and removing the TV stand. Be sure that
no hard or sharp object, or anything that could scratch or damage the LCD display, comes into contact with it. DO NOT exert
pressure on the front of the TV at any time because the screen could crack.
1. Disconnect all cables connected to the TV.
2. Lay the TV down on a flat surface preferably a table with the back side facing up. Make sure the neck of the TV stand over
hangs the edge of the table. Please make sure a soft cushioned material (such as a pillow or thick piece of foam) is placed
beneath the screen.
3. Carefully place the glass stand onto the neck of the stand. Hold the metal bracket over the holds and fix into position using
the 3 screws provided as shown.

Mounting the TV to a wall (L40S3D13N)

Remove the stand assembly before mounting the TV onto the wall.
1. Remove the neck cover by untightening the screw holding the cover
to the neck.
2. Remove the neck and stand by untightening the 4 screws holding
the neck to the TV.
3. This TV is designed to be wall-mounted with a standard 200 mm
x 200 mm mounting kit (sold separately) designed for flat-panel
TVs. Mount this TV according to the instructions included in the
mounting kit. Due to space restrictions, we recommend that you
make all connections before mounting on to the wall.
8
200mm
200mm