Pioneer L40S3D13N Instruction Manual page 21

Tuning via Cable
If you have cable that attaches to your TV via the Aerial lead then
follow the instructions below to tune in your TV.
1. Press the buttons to select Cable. Then press the
button to go to the next screen.
2. Press the
buttons to select Digital & Analogue
(Recommended), Digital or Analogue. Then press the
button to go to the next screen.
3. Press the
buttons to select Scan. Then press the
button to go to the next screen.
You will now see the 'Please configure the cable info' screen.
4. Press the buttons to select Full. Then press the OK
button.
Your TV will now start to tune in all available TV channels. Please
be patient this will take a few minutes.
When all of the TV channels have been tuned in the
'Congratulations' screen will appear.
5. Press the OK button to exit the menu and start watching TV.
4
Initial Setup
21
GB