Channel Install (Manual And Auto Tuning) - Pioneer L40S3D13N Instruction Manual

Channel install (manual and auto tuning)

Select the channel install menu if you need to retune your
TV, or tune in an analogue channel (if you have connected an
analogue device).
to highlight channel install, then press the OK
• Press the
button to select the channel install menu.
Automatic search - settings - setup - channel install
Select automatic search if you would like to retune in all of the
TV channels.
• Press the to highlight automatic search, then press the
OK button.
• Press the buttons to select your country, then press OK.
• Press the to select:
Digital & Analogue - Digital - Analogue, then press OK.
Your TV will now start to tune in all available channels.
Automatic update - settings - setup - channel install
Select automatic update if you would like to check if any new
channels are available.
• Press the to highlight automatic update, then press the
OK button.
Analogue manual scan - settings - setup - channel install
If you have connected an external device (e.g. a video recorder)
via the aerial lead you may need to manually tune in an
analogue channel. Make sure the device is switched on before
starting the scan.
• Press the to highlight analogue manual scan, then press
the OK button.
to highlight search, then press OK.
• Press the
Your TV will now search for the analogue signal.
Antenna manual installation (manual digital tuning) -
settings - setup - channel install
Select antenna manual installation if you want to manually tune
in a digital channel.
• Press the to highlight antenna manual installation, then
press the OK button.
• Press the NUMBER buttons to select the starting frequency.
Customising TV Settings
5
GB
43