Entertainment; Connecting A Usb Storage Device; Media Centre - Pioneer L40S3D13N Instruction Manual

Chapter
7
7

Entertainment

Connecting a USB Storage Device

1. Switch off the TV before connecting any USB
storage device.
2. Connect your USB storage device to the USB port
of your TV. 1, 2 or 3 (55" and 46" models)
3. Plug the connected devices into the mains socket
before switching on the TV.
4. Press the STANDBY button to turn on your TV and
your USB storage device.
Some versions of portable hard disk may require more power than the
TV USB socket can provide. To ensure correct operation please use the
power adapter for that device.
If a USB hub is used, make sure its mains adapter is connected to the
mains supply as the total current consumption may exceed 500mA.
The maximum supported storage space of the hard disk is 1 TB.
The file system only supports FAT32 format.
If you want to store the video streaming of a TV programme, the
transfer rate of the USB storage device must not be less than 2MB/sec,
otherwise the picture and sound of the programme will be affected
and a warning statement will be shown on the screen. If this happens,
please upgrade your USB storage device.
The TV screen will be blank temporarily as it will take time to start up
and stabilise the connected hard disk. This is normal and the starting
time may vary depending on the brand and the memory size of the
connected hard disk.
Disconnect the USB storage device if it is not in use.

Media centre

From the media centre you can view photos, listen to music or watch
a film from your USB storage device.
Press the MENU button.
•
• Press the buttons to highlight Media, then press the
OK button.
• The Media Centre main menu will now be on screen. From here
you can select Photo, Music or Video.
You will only see files that relate to your chosen category i.e. JPG
files in PHOTO.
USB Hub
SCART
LAN HDMI 3 (ARC) HDMI 2
ADAPTER
USB
USB Cable
(not included)
Adapter
Portable
hard Disk
USB
VGA
/
GB
USB 2
COMMON
INTERFACE
YPbPr
USB 1
59