Table of Contents
Advertisement
5.0
INDICATOR PARAMETERS
Pressing the
allows the user to access the parameters.
Scroll through the list of functions using the and directional keys. Press
to enter a parameter.
Press [Esc] to exit the scale parameter section and return to normal weighing.
This group of parameters is used to control the operation of the scale.
Parameter
time
Set Time.
Set date format and settings.
When the display shows
mmddyy, ddmmyy or yymmdd
date
press the [Pcs/ ] key, to
select the desired date format,
then enter the date.
Backlight set to always on,
always off or automatic.
bL
Then set color and brightness
Set auto power off time, in
Power
minutes, after inactivity
Key bp
Key beeper settings
Check weighing beeper
Chk bp
settings
Enable or disable weighing
units, will not allow to disable
Unit
all units, at least one must be
enabled. Parts counting can be
enabled/disabled
Auto-Z
Auto zero settings
Filter
Filter speed settings.
Brings up the 1
Rs 1
Includes PC commands and
print settings
Rs 2
Brings up RS232 menu 2
S-id
Set Scale ID
U-id
Set User ID
rechar
© Adam Equipment Company 2019
key and holding for 2 seconds during normal operation
Description
RS232 menu.
st
Options
Enter the time manually.
Enter the date format and
then the numeric value
manually.
oFF, on, AUTO
then: GREEN, RED, AMBER,
BLUE, WHITE
then: mid, high, low
Off, 1, 2, 5, 10, 15
On, Off
In, Out, Off
Kg
Grams
lb
oz
lb:oz
N (Newtons)
Off, 0.5, 1.0, 1.5, 2.0, 2.5, 3.0
Slower, Slowest, Faster,
Fastest
Then: 1-6
PC, Print
PC, Print
To be entered manually
To be entered manually
-
[
]
Default
setting
00:00:00
dd:mm:yy
AUTO
5
On
In
Kg
2.0
Faster
000000
000000
-
Advertisement
Table of Contents
