Silvercrest SHAC 2400 C2 Operating Instructions Manual page 21

WARNING! RISK OF PERSONAL INJURY!
Do not take the hair dryer into use if it has fallen down or
►
is damaged in any way. Arrange for the appliance to be
checked and/or repaired by qualified technicians.
Do not cover the air intake grill while operating the appliance.
►
Clean the grill at regular intervals.
The hair dryer becomes hot when it is in use. Hold it only by
►
the grip when it is hot.
Operation
Heat and blower levels
NOTICE
► Run the hairdryer at the highest blower and heat levels for about 2–3 minutes
before first use. This helps to remove any production residues that may remain
in the interior of the appliance.
1) Insert the plug into a power socket.
2) Switch the hair dryer on with the blower level switch
The hair dryer is fitted with two function switches. With these you can separately
select the strength of the air flow (blower level switch
(heat level switch
Blower levels
0
Heat levels
3) After use, switch the appliance off in that you place the blower level switch
into position "0". Then remove the plug from the wall socket.
│ GB │ IE
■ 18
):
The hair dryer is switched off
reduced air flow
full power air flow
low heating level
medium heat level
high heating level
.
) and the level of heat
SHAC 2400 C2