Electrical Safety - MTX 350359 User Manual

6
ATTENTION!
Use the protective glasses for eyes protection.
ATTENTION!
Read all instructions and safety rules before starting work.
Ignoring these instructions can result in eye injury.
ATTENTION!
Shared use with the device of optical instruments increases the risk of eye damage.
• Always make sure that the persons had been warned about the danger of a direct hit by a laser beam in the eye.
• Do not look into the laser beam and don't point the laser beam directly into the eyes of others. This can lead to
serious damage to the eye.
• Do not use any optical instruments including theodolites and telescopes to observe the laser beam. This can lead
to serious damage to the eye.
• Always remove the batteries when cleaning the exit hole or laser lens.
• Do not operate the laser tool near children or allow children to use laser tool. This can lead to serious damage to
the eye.
• Always place the laser tool in "OFF" position, when not in use.
• If the switch is left in the "ON" position, it increases the risk of accidental laser beam in the eye.
• It is forbidden to work near the sources of ignition, such as: open flame, sparks, overheated wires, hot surfaces, etc.
Fix the laser tool securely when installing. The fall of the laser tool can cause damage to the laser and / or
serious injury.
Do not use this laser tool for purposes differ from those specified in this manual. Violation of these instructions
may lead to serious injury.
Repairs and maintenance should always be performed by a qualified specialist. Repairs carried out by
unqualified specialists can cause serious injury.
Do not disassemble the laser tool. Inside the laser instrument, there are no parts which can be repaired.
Disassembling the laser will void all warranties on the product. Do not make any changes to the design of the
instrument.
ATTENTION!
Batteries are prone to leakage, which could lead to failure of the device.
To reduce the risk:
• Always follow the instructions and warnings on the label and the battery pack.
• Do not short-circuit the battery to each other.
• Do not charge alkaline batteries.
• Do not use new batteries together with old ones. Replace all batteries at the same time with new batteries of
the same brand and the same type.
• Do not use batteries of different chemical composition.
• Dispose of batteries in accordance with local regulations for products containing heavy metals.
• Do not throw batteries into the fire.
• Keep batteries out of the reach of children.
• Remove the batteries if the device will not be used for several months.
SELF LEVELING LASER

ELECTRICAL SAFETY