Technical Data; Specification - MTX 350359 User Manual

2
Laser Level - a device diodes' based, that emit a powerful ray of light (laser). It is used to build and control
the horizontal and vertical surfaces, as well as the layout of vertical and horizontal lines. It has the ability to
simultaneously produce five rays in different surfaces and the ray leveling. Designed for use indoors and
outdoors. Suitable for both domestic and professional use. Delivery completeness.
It can be installed on a flat surface or on a tripod MTX 350909.
This leveling laser is used for the following work:
• Laying of floor and wall tiles.
• Install wall cabinets.
• Interior finish.
• Finishing work on wood.
• Installation of window frames.
• Installation of racks and shelves.
• Mount a suspended ceiling.
• Lining of walls with wooden panels or with other material.
• Mounting accessories for fixing on a wall: sockets, switches, lights.
• Installation of wall decoration: paintings, photographs, etc.

Specification

Laser wave length, nm
Working range, m
Horizontal leveling deviation
Level of accuracy
Right angle deviation
Vertical leveling deviation
Power Battery type AA, 3 pcs
Power block
(inclusive in delivery)
Working temperature
Weight
SELF LEVELING LASER
CORRECT USE

TECHNICAL DATA

Value
perpendicular rays / vertical ray and horizontal line-635 nm
point (plumb line) 650 nm
indoors - up to 10 m, with use of detector - not less than 50 m
± 2.5°
± 1 mm/5 m ± 0.5
90° ± 1°
± 2 mm/3 m ± 2
DC 4.5V (inclusive in delivery)
Input – FC 220V/50Hz
output – DC 4.5V
- 10 + 45 °С
1200 gr