Introduction; General Instructions - 2elle BETA Manual

INTRODUCTION

Please carefully read this instruction manual before using the espresso machine. It will
advise how to optimally use the machine's potentialities, how to keep it in working
order and how to behave in case of problems.
The espresso machine is for professional use only.
It is designed for the preparation of hot drinks such as:
Tea, cappuccino, espresso in the versions regular, weak, short, etc.
Hereafter, instructions for a proper use will be mentioned.

GENERAL INSTRUCTIONS

The installation has to be done in compliance with the security regulations in force and
by qualified and competent personnel.
A wrong installation may cause damage to people and things.
Only if connected to an effective grounding device made according to the current safety
regulations, the device is totally secure.
Verifying this requirement is important and would necessitate a careful check of the
system by part of qualified personnel in case of doubts.
The manufacturer cannot be considered responsible for any damages caused by a
wrong grounding device.
The system has to be equipped with a protective master switch, as per the safety
regulations on force, with distance to the opening contacts equal to 3 mm or more.
The use of extension leads or electric adapters including multiple sockets is unadvisable.
Should it be necessary, please solely use adapters that correspond to the current safety
regulations.
Never exceed the KW power value mentioned on the adapter or the extension leads.
The espresso machine is designed for the preparation of hot drinks such as coffee, tea,
hot milk. This device should be used for the above mentioned purpose only. Any other
use is to be considered wrong and therefore dangerous.
The manufacturer cannot consider himself responsible for any damages caused by
improper use.
Deactivate the device from the electrical grid through the master switch before carrying
out any maintenance works.
As for cleaning, please specifically follow what is mentioned in this manual.
In case of breakdown or malfunction, turn off the device; do not try do make any repair,
but call an expert technician. Repairs should be done by technicians that have been
authorized by the manufacturer, using uniquely original spare parts.
The failure to comply with this regulation compromises the devices' safety and the
warranty will fail.
Non-authorised damaging of any part of the device makes the warranty fail.
25