AEG HSM 5557 Instruction Manual page 44

English
44
Outlining and Shaving the Neck
• The clipper head allows outlining the shape of the beard, even
in difficult to reach places as well as shaving the hairline at the
neck.
• Turn the hair clipper off with the switch (4).
• Remove the comb attachment and turn the device on again.
• Use the taper lever (5) for adjusting the hair length. Adjusting the
lever to an upwards position will provide for a shorter hair length
setting.
Finish Operation
Slide button (4) towards the "I" icon. The switch position "0" (Off) will
be visible.
Cleaning and Maintenance
• Regular cleaning and maintenance ensures optimum results and
long lifetime.
• Turn the device off and disconnect the mains plug.
Warning:
► Do not submerge the unit in water. This would cause electric
shock or fire.
Caution:
► Do not use a wire brush or other abrasives.
► Do not use sharp or abrasive cleaning agents.
• Use the cleaning brush to remove remaining hair after use.
• Therefore, take off the comb attachment.
• Regularly apply 1 - 2 drops acid-free oil to the clipper head.
• Clean the casing with a slightly damp cloth, if necessary.
Noise emission
The workplace-related emission value is less than 70 dB(A).