Elta 6681 User Manual page 14

RADIO OPERATION
1. Slide the function switch to the "AM" or "FM" position.
2. Turn the Tuning knob to your desired radio station.
3. Adjust the sound level by rotating the volume control knob.
CD OPERATION
To play a CD, please follow the steps underneath:
1. Set the function Switch to the "CD" position;
2. Open the CD door, insert the CD with the printed side facing up and close the CD door;
3. Disc information(total number of tracks) will appear on the LED display;
4. Press (Play/Pause) button to start playing the CD;
5. Adjust the Volume control to the desired volume level;
6. Press (Stop), to stop playing the CD.
REPEAT MODE
Repeat 1:
Repeat All:
To Cancel Repeat Function: Press the REPEAT Button, until the dot will be turned off (Indication "XX.").
SKIP AND SEARCH MODE
1. During Play or Pause mode, when the
goes back to the beginning of the current track.
2. During play mode, when the
within the track with audible high speed playback.
PROGRAM MODE
1. Press during the stop mode ( ) the PROG button once. On the display flashes the "0". Press the
button to select your desired music title, the LED display will show the appropriate track number.
Consequently press the button PROG.
2. Repeat the procedure above, until all desired tracks have been programmed. Up to 20 tracks can be
programmed.
3. To start the programmed playback, press the
4. To cancel the programmed play mode, simply open the CD door.
14.
When the REPEAT Button is pressed once, on the display "X.X" will light up
and the dot flashes. This single track will be repeated.
When the REPEAT Button is pressed twice, on the display "X.X" will light up
permanently. The whole disc will be played continuously.
or button is pressed once, the player goes to the next track or
or button is pressed and held, the player searches forward or backward
button once.
or