Function Of Controller - Abisal SKY SVP03 Manual Instruction

Function od controller
START/ STOP: Insert the power plug, switch on power, then press
the buton to start the product. In the operation of the machine,
press this buton to stop working.
TIME-: Time decrease: the default working time is 10 minutes,
divided into 10 levels, press this button to decrease time.
Speed+: Speed increase: Manual 1-20. Press this button to incre-
ase the speed when the machine is operating.
TIME+: Time increase: the default working time is 10 minutes,
divided into 10 levels, press this button to increase time.
SPEED-: Speed decrease: Manual 1-20. Press this button to de-
crease the speed when the machine is operating.
AUTO/MODE: Auto/Mode: Default to manual mode, automatic
mode is activated once pressing this button. Press the button re-
peatedly to cycle through the 'P1' 'P2' 'P3' automatic operating
mode or '88' manual mode. Auto mode, humanized program-
ming, automatically adjusting vibration frequency. In automatic
mode, speed and time is not adjustable. In the manual mode, the
stand by can adjust the time, the speed is not adjustable; when
operating, speed adjustable, but time is not adjustable.
!
Note: The effective reception range of the remote control
signal is 2,5 meters, the infrared emission indicator of the
controller should be aligned the infrared receiving window
on the product.
USB port 62 MB
EN
9