Table of Contents
Advertisement
4.1 KERN EMB 200-3V
+
Invoke mode for density determination of solid material
1. Turn on the scale with
2. If the scale does not display, "0.000g", press
3. Access by pressing
"SOLId" is briefly displayed, followed by the actual entered density of the aid
liquid. If necessary, change as described later.
+
Enter the density of the aid liquid considering the current temperature.
4. Press
, the last digit flashes.
5. Use
to increase the numeric value of the flashing cipher.
Use
to move the number selection to the right, the respective active
position flashes.
6. Confirm input by
8
, "0.000g" is displayed.
the density determination mode for solids.
(example water at 19°C)
.
(example water at 23°C)
YDB-04-BA_IA-e-1910
Advertisement
Table of Contents
