Scope Of Delivery; Commissioning And Operation - Proxxon BS/A Manual

Battery:
Rechargeable lithium-ion battery
Nominal/charging voltage: 10.8V/12.6V
Energy/Capacity:

3 Scope of delivery

BS/A (29810)
1 pc. Belt sander BS/A
1 pc. Connection adapter
1 pc. Rubber connecting piece
1 pc. Storage case
1 pc. Charger
1 pc. Battery
1 pc. Operating instructions
1 pc. Safety guidelines
2 pcs. Fan sander K 80
2 pcs. Fan sander K 180
BS/A (29812)
1 pc. Belt sander BS/A
1 pc. Connection adapter
1 pc. Rubber connecting piece
1 pc. Operating instructions
1 pc. Safety guidelines
2 pcs. Fan sander K 80
2 pcs. Fan sander K 180

4 Commissioning and operation

Caution:
Before starting up, read the warning instruc-
tions and the labels attached to the charger
and the battery!
Use and handling of battery-powered
tool
a. Batteries should only be charged with
the chargers recommended by the ma-
nufacturer. A charger suitable for a certain
type of battery poses a fi re hazard if used
with other batteries.
b. Use only the designated batteries in the
power tools. The use of other batteries can
- 12 -
28.19Wh/2.61Ah
3 INR 19/66
cause injuries and pose a fi re hazard.
c. Keep unused batteries away from paper
clips, coins, keys, nails, screws and other
small metal objects which could bridge
the contacts. A short-circuit between the
battery contacts can cause burns or fi re.
d. If used incorrectly, the battery can leak
fl uids. Avoid contact. In the event of in-
cidental contact, rinse with water. If the
fl uid gets into your eyes, seek medical
assistance. Leaking battery fl uids can
cause skin irritations or burns.
e. Do not use a damaged or modifi ed bat-
tery. Damaged or modifi ed batteries can
behave unpredictably and cause fi res, ex-
plosions or injuries.
f. Never expose a battery to fi re or exces-
sive temperatures. Fire or temperatures
above 130°C can cause an explosion.
g. Observe all charging instructions and
never charge the battery or battery-pow-
ered tool outside the temperature range
specifi ed by the operating instructions.
Incorrect charging or charging outside the
approved temperature range can destroy
the battery and increase the risk of fi re.
Service
a. Have your power tool repaired only by
qualifi ed specialists and use only origi-
nal spare parts. This ensures that the pow-
er tool remains safe to operate.
b. Never service damaged batteries. All
maintenance work on batteries should only
be carried out by the manufacturer or autho-
rised customer service centres.
Charging the battery (Fig. 2 and 3)
Please note: The device, battery and charge
are also separately available at retailers!
When delivered, the battery is partially char-
ged and must be charged completely before
commissioning the device. To do so, proceed
as follows: