Philips AVENT SCF870 User Manual page 10

EngliSh
10
Note: If the baby food is still too solid add some fluid (e.g. water) until the baby food is soft and smooth.
Do not let the appliance blend for more than 30 seconds at a time. If you have not finished
blending after 30 seconds, switch off the appliance and wait a few seconds before you continue. If
the appliance becomes hot, let it cool down for a few minutes before you continue.
Make sure the baby food is at a safe temperature for your baby.
8 When you have finished blending, simply release the control knob. (Fig. 16)
The knob automatically returns to the off position.
,
9 Unplug the appliance.
Cleaning and maintenance
Clean the appliance after every use.
Never immerse the motor unit in water.
Never use bleach or chemical sterilising solutions/tablets in the appliance.
Never use scouring pads, abrasive cleaning agents or aggressive liquids such as petrol, acetone or
alcohol to clean the appliance.
1 Unplug the appliance and remove the jar from the motor unit (Fig. 17).
2 Remove the sieve from the lid and remove the blade unit from the jar (Fig. 18).
3 Clean the blade unit under the tap thoroughly, immediately after use. Make sure you also
rinse the inside of the tube of the blade unit (Fig. 19).
Clean the blade unit very carefully. The cutting edges are very sharp.
Note: If you want to clean the blade unit more thoroughly, you can also place it in the dishwasher after
you have rinsed it.
4 Clean the other parts that have come into contact with food in hot water with some
washing-up liquid immediately after use.
Note: All parts, except the motor unit, can also be cleaned in the dishwasher.
5 If necessary, clean the motor unit with a moist cloth.
Descaling
Descale the appliance every four weeks to ensure it continues to work 100% effectively. To reduce
scale build-up, it is helpful to use pre-boiled or filtered water in the appliance.
Never use the steaming function when there is descaling solution in the water tank.
1 Make sure the appliance is switched off and unplugged.
2 Add one sachet of citric acid (10g) to 200ml of warm water.
3 Fill the water tank with the descaling solution.
4 Leave the solution in the water tank overnight.
5 Pour the used descaling solution out of the tank. (Fig. 20)
6 Rinse the tank thoroughly with fresh water.
7 Fill the tank with 200ml water and let the appliance complete one long steaming process (20
min) with the jar empty before you use the appliance with food again.