Do you have a question about the SV12 and is the answer not in the manual?
Questions and answers
Joan Bell
April 14, 2025
My Dyson SV12 only runs for 10 minutes
1 comments:
Mr. Anderson
April 14, 2025
Your Dyson SV12 may only run for 10 minutes because it has a generic (non-genuine) battery. Generic batteries are cheaper but often don't last as long and can cause performance issues. Using a genuine Dyson battery is recommended for proper function and longer run time.
This answer is automatically generated
Franklin Tan
January 26, 2025
A red plastic strip drop out from somewhere when I fill the slim V12 detect with water for the roller - wet cleaning . Can u send me the picture or illustration showing how to insert back this red plastic strip ?
1 comments:
Mr. Anderson
May 14, 2025
To reinsert the red plastic strip on the Dyson Slim V12 Detect after it has fallen out:
1. Align the plastic tube with the motor piece as it was originally positioned. 2. Remove the screw near the seal area. 3. Lift the left side of the ring up from the screw area while holding the tube. 4. Insert the replacement strip into the screw piece first. 5. Push down firmly to secure it in place (placing the tube on a soft surface like carpet may help). 6. Optionally, clean the tube and motor area before reassembly.
Once reassembled, the vacuum should function properly again.
Page 1
Operating manual Assembly click click 3.5 hrs Wash the filter unit Wash the filter unit with cold water at least every month. Ensure that the filter unit is completely dry before refitting. Register your Dyson 2 year guarantee today SV12...
Page 2
MARKINGS IN THIS MANUAL AND ON Visit our website to register your Dyson full parts and labour guarantee online, and for online help, support videos, general tips and useful information about Dyson.
Page 3
21. Use only the Dyson charger Part Number 217160 or 270576 for charging this Dyson machine. Use only Dyson batteries: other types of batteries may explode, causing injury to persons and damage.
Page 4
Power mode Boost suction Suction mode 2 Suction mode 1 click click Recharging Recharging on the dock Lights during charging Charging, low charge 3.5 hrs Charging, medium charge Charging, nearly full Fully charged...
Page 5
Medium level of charge Blockage indicator Filter unit requires washing Low level of charge Filter unit not fitted correctly Empty, needs charging See battery section click click Lights diagnostics Battery fault-call Dyson Helpline Main body fault-call Dyson Helpline Charger fault-call Dyson Helpline click...
Page 6
Wash the filter unit Looking for blockages Wash the filter unit with cold water at least every month. Ensure that the filter unit is completely dry before refitting. click click...
Page 7
Direct drive cleaner head: Clearing obstructions Mini motorised tool: Clearing obstructions...
Page 8
The LCD display will alert you when the filter unit needs washing. We recommend disposal. You can send your old Dyson appliance back to us (at our cost) and we will that you wash your filter at least once a month or when your machine alerts you.
Page 9
You are also entitled to have your Dyson machine repaired or replaced if it fails to be of acceptable quality and the failure does not amount to a major failure.
Page 10
DYSON CUSTOMER CARE Your Dyson appliance will be covered for parts and labour for 2 years from the date of purchase, as detailed in the terms of the Dyson guarantee in this Dyson Operating Manual. If you have a query about your Dyson appliance, contact us via the website.
Page 12
Privacy statement By providing the above information, you consent to Dyson using that information (including disclosing it to third parties such as our business partners or professional advisers) for the purposes of providing the services you have requested. With your consent, Dyson may also use the information you provide for future marketing and research purposes (including sending commercial electronic messages).
Need help?
Do you have a question about the SV12 and is the answer not in the manual?
Questions and answers
My Dyson SV12 only runs for 10 minutes
Your Dyson SV12 may only run for 10 minutes because it has a generic (non-genuine) battery. Generic batteries are cheaper but often don't last as long and can cause performance issues. Using a genuine Dyson battery is recommended for proper function and longer run time.
This answer is automatically generated
A red plastic strip drop out from somewhere when I fill the slim V12 detect with water for the roller - wet cleaning . Can u send me the picture or illustration showing how to insert back this red plastic strip ?
To reinsert the red plastic strip on the Dyson Slim V12 Detect after it has fallen out:
1. Align the plastic tube with the motor piece as it was originally positioned.
2. Remove the screw near the seal area.
3. Lift the left side of the ring up from the screw area while holding the tube.
4. Insert the replacement strip into the screw piece first.
5. Push down firmly to secure it in place (placing the tube on a soft surface like carpet may help).
6. Optionally, clean the tube and motor area before reassembly.
Once reassembled, the vacuum should function properly again.
This answer is automatically generated