Shock Absorber Compression Adjustment; Shock Absorber Rebound Adjustment; Steering Lock; Side Stand - SHERCO Enduro 4.5i 2004 User Manual

Shock absorber compression
Screw A controls fast compression (major impacts).
Screw B controls slow compression (sensitivity).
Each screw has 25 clicks, turning them clockwise increases
the compression and vice-versa.
Standard adjustment :

Shock absorber rebound adjustment

The rebound is adjusted by turning the black ring at the base
of the shock abaorber C: There are 25 adjustment possibilities.
If you require a softer rebound, turn the black ring in the direc-
tion of the arrow marked (-). If you require a firmer rebound,
turn the black ring in the direction of the arrow marked (+).
Standard adjustment :
74
adjustment
A
B
A - Turn clockwise to the stop and then
back off 10 clicks
B - The same
C
C - Turn clockwise to the stop and then
back off 9 clicks

Steering lock

The steering lock is on the steering column. Turn the
handlebars to the left, insert the key, turn it counter-
clockwise, push in, turn clockwise and remove.
S i d e S t a n d
Remove the safety rubber 1 , press on the stand with
your foot, and keep in this position until stand sup-
ports full weight of bike.
!
WARNING : The side stand has a safety system
that automatically folds it back as soon as the bike is
moved into the upright position.
!
WARNING : The side stand is designed to sup-
port the motor bike alone.
1
75