Canon imagePRESS C10010VP Quick Manual page 36

• Copyrighted Works/Works of Art without
Permission of Copyright Owner
Disclaimers
• The information in this document is subject
to change without notice.
• CANON INC. MAKES NO WARRANTY OF ANY
KIND WITH REGARD TO THIS MATERIAL,
EITHER EXPRESS OR IMPLIED, EXCEPT AS
PROVIDED HEREIN, INCLUDING WITHOUT
LIMITATION, THEREOF, WARRANTIES AS TO
MARKETABILITY, MERCHANTABILITY, FITNESS
FOR A PARTICULAR PURPOSE OF USE, OR
NON-INFRINGEMENT. CANON INC. SHALL
NOT BE LIABLE FOR ANY DIRECT, INCIDENTAL,
OR CONSEQUENTIAL DAMAGES OF ANY
NATURE, OR LOSSES OR EXPENSES RESULTING
FROM THE USE OF THIS MATERIAL.
About This Manual
Screens
Screens of the touch panel display used in this
manual are those taken when the imagePRESS
C10010VP has the following optional equipment
attached to it:
• Two-Knife Booklet Trimmer-A
Booklet Trimmer-F
•
• Saddle Finisher-AN
• Puncher Unit-BT
• Paper Folding Unit-J
High Capacity Stacker-H
•
• Perfect Binder-E
• Document Insertion Unit-N
Duplex Color Image Reader Unit-M
•
POD Deck-D
•
• Upright Control Panel-F
Note that functions that cannot be used
depending on the model or options do not
appear on the touch panel display.
Illustrations
Illustrations used in this manual are those
displayed when the imagePRESS C10010VP has
the following optional equipment attached to it:
Duplex Color Image Reader Unit-M
•
• Upright Control Panel-F
• Saddle Finisher-AN
36
If your machine is of the model dedicated to
printing only
The machine dedicated to printing only cannot
be used for any other functions than printing.
Although this Guide contains the descriptions
of the functions and operations for copying,
faxing, and scanning as well as printing, please
read only the necessary descriptions to use your
machine.
Trademarks
QR Code is a trademark of DENSO WAVE
INCORPORATED.
All brand names and product names appearing
on this manual are registered trademarks or
trademarks of their respective owners.
Third Party Software
This Canon product (the "PRODUCT") includes
third-party software modules. Use and
distribution of these software modules,
including any updates of such software
modules (collectively,the "SOFTWARE") are
subject to license conditions below.
(1) You agree that you will comply with any
applicable export control laws, restrictions
or regulations of the countries involved in
the event that the PRODUCT including the
SOFTWARE is shipped, transferred or
exported into any country.
(2) Rights holders of the SOFTWARE retain in all
respects the title, ownership and intellectual
property rights in and to the SOFTWARE.
Except as expressly provided herein, no
license or right, expressed or implied, is
hereby conveyed or granted by rights
holders of the SOFTWARE to you for any
intellectual property of rights holders of the
SOFTWARE.
(3) You may use the SOFTWARE solely for use
with the PRODUCT.
(4) You may not assign, sublicense, market,
distribute, or transfer the SOFTWARE to any
third party without prior written consent of
rights holders of the SOFTWARE.
(5) Notwithstanding the foregoing, you may
transfer the SOFTWARE only when (a) you
assign to a transferee all of your rights to the
PRODUCT and all rights and obligations
under the conditions governing the
SOFTWARE and PRODUCT and (b) such
transferee agrees in writing to be bound by
all these conditions.
(6) You may not decrypt, decompile, reverse
engineer, disassemble or otherwise reduce
the code of the SOFTWARE to human
readable form.
(7) You may not modify, adapt, translate, rent,
lease or loan the SOFTWARE or create
derivative works based on the SOFTWARE.
(8) You are not entitled to remove or make
separate copies of the SOFTWARE from the
PRODUCT.
(9) The human-readable portion (the source
code) of the SOFTWARE is not licensed to
you.
Notwithstanding (1) through (9) above, the
PRODUCT includes third-party software
modules accompanying the other license
conditions, and these software modules are
subject to the other license conditions. Please
refer to the other license conditions of
third-party software modules described in
Appendix of Manual for the corresponding the
PRODUCT. This Manual is available at https://
oip.manual.canon/.
By using the PRODUCT, you shall be deemed to
have agreed to all applicable license conditions.
If you do not agree to these license conditions,
please contact your service representative.
ACCEPTANCE
THE TERMS OF THIS THIRD PARTY SOFTWARE
STATED HERE OR IN RELATED WARRANTY
PROVISIONS SHALL BE DEEMED ACCEPTED
UPON YOUR USE OF THE PRODUCT FOR ONE
OR MORE OF ITS NORMAL PURPOSES, IF THERE
HAS BEEN NO OTHER PRIOR EXPRESS
ACCEPTANCE.
THE TERMS OF THIS THIRD PARTY SOFTWARE
GOVERN THE THIRD PARTY SOFTWARE AS
DELIVERED WITH THE PRODUCT AND ALL
UPDATED VERSIONS OF THE THIRD PARTY
SOFTWARE PROVIDED UNDER MAINTENANCE
AGREEMENTS OR OTHER SERVICE
ARRANGEMENTS FOR THE PRODUCT WITH
CANON USA OR CANON CANADA OR THEIR
RESPECTIVE AUTHORIZED SERVICE
ORGANIZATIONS.
TERMS OF imageWARE
REMOTE SERVICE
If your Canon Office Imaging Product
("Product") is enabled with embedded
functions for the imageWARE Remote
Diagnostic Service ("iWR"), or your Product is
not iWR enabled but it interacts with the iWR
Plug-in program of imageWARE Enterprise
Management Console ("EMC") software, then
Canon USA, Canon Canada or their respective
authorized independent Canon retail dealers
can access Product meter readings and receive
notifications of certain service errors
automatically via the internet. You can read
more about iWR in Canon published materials
available from your dealer or on the web sites of
Canon USA [www.usa.canon.com] or Canon
Canada [www.canon.ca.]. iWR will only collect
and transmit Product specific meter readings
and service data, and will not access, collect or
transmit End-User image data in the Product.
Your instruction to Canon USA, Canon Canada
or your dealer to activate iWR for a Product shall
be considered (i) a representation that you have
an internal IP network and internet access
available on a generally continuous basis; (ii)
authorization by you to establish, and perform
during the period of iWR activation, HTTPS
communications using your network
bandwidth for transmissions over the internet
of use and service data accumulated by the
Product, and (iii) authorization by you to store,
analyze and use this data for purposes related
to servicing the Product and for Product and
iWR improvement.