Universal Transmitter - DAITEM DP8000 Series Manual

I n s t a l l a t i o n

Universal transmitter

The universal transmitter must be:
inside,
fixed to the non-opening part of the
protected item, not less than 1m from the
ground,
away from all sources of interference
(electricity meter...).
If the universal transmitter must be fixed
to a metallic surface, insert a shim of wood
or plastic of 20 mm minimum thickness
between the base and the metallic surface.
Door magnet
Location arrow
for aligning the
magnet to the
integral contact
Tamper
actuator
Cable entry
for connection
GB
of external contact
Fix the base and its tamper actuator
with two screws via holes A and B, then
re-clip the lid.
The tamper actuator is found in the
accessory pack.
38
Contacts
Summary of the opening and closing distance between the universal transmitter and the
magnet for which the integral contact analyses the change of state of the exit.
A
(1): The distance between the integral contact and the magnet when the exit is closed is no more than 5 mm max.
Integral contact
When the exit is closed, the door-magnet
must be positioned in front of the integral
contact (location arrow found on the
B
base).
State
Movement
of contact
Open
Move away (1)
Close
Open
Vertical slide (1)
Close
-
Open
Horizontal
slide (1) Close
Door magnet Wedge
5mm max 5mm max
Universal transmitter
Open and close distance of integral contact
Wood mounted Mild steel mounted
15 mm
7 mm
35 mm
28 mm
9 mm 16 mm 10 mm
7 mm 14 mm 7 mm
Fitting and closing the door magnet
13 mm
11 mm
22 mm
20 mm
14 mm
12 mm
Lid
Magnet
Base screwed
to the opening leaf
Wedge (if necessary)
Daitem