Page 1
Aufbauanleitung / assembly instructions mod. 3311 - 3315 Metallfuss SW17 M10 x 708 30 x 10,5 Filz / felt M6 x 45 1. Montagematerial 2. Die Glasplatte auspacken und umgedreht auf 1. fitting material gepolsterten Montageböcken ablegen. 2. Unpack the glass and lay it upside down onto padded assembling trestles.
Page 2
SW 17 30 x 10,5 5. Die Füsse mit je einer Unterlegscheibe und 6. Die Mutter mit der mitglieferten Stecknuss einer Mutter fixieren. (SW17) festziehen. 5. Put a washer onto each thread-bolt and screw 6. Tighten the nut by using the provided box nut a nut onto each thread-bolt.
Page 3
9. Fertig vormontierter Tisch. 10. Zum Wenden den Tisch mit zwei Personen 9. Assembled table. anheben,... 10. To turn the table, please lift it up by two persons,... 11..über die Tischkante wenden und... 12..den Tisch auf den Böcken ablegen. Den 11.
Page 4
13..am Bestimmungsort vorsichtig absetzen. 13..put the table at its final destination cautiously onto the floor. 13. Fertiger Tisch. 13. Finished table. 4 / 4 3311 - 3315 Metallfuss.odt Änderungsdatum: 16.09.15...