Advertisement
Note: Make sure that the polarity of the batteries is correct. The positive
(+) and negative (-) ends of each battery must match the positive (+) and
negative (-) markings in the battery housing.
1
2
DPI Switch
The mouse supports 5 levels DPI: 800/1200/1600/2400/4000 (default DPI:
1200). To switch to either setting, press the "DPI +" button on the top of the
mouse once to upgrade the DPI, LED light would flash for appropriate times,
when DPI reaches 4000, press "DPI +" button, LED would not flash. Click
the "DPI -" button on the top of the mouse once to downgrade the DPI, LED
light would flash for appropriate times. When DPI reaches 800, press DPI-
button, LED would not flash.
12-Month Battery Life
The mouse consumes little power and offers a long battery life of up to 12
months without changing battery. However, the actual battery life may vary
based on user and computing conditions.
Low Power Indicator
The mouse is equipped with low power indicator.
When the battery power gets low during the period
of use, the indicator under the scroll wheel will
flash. Please replace the battery.
Note: We recommend you to use AA alkaline dry
cell battery.
Low Power Indicator
Reconnection
There is a connection code for this mouse. High temperatures, electro-
magnetic fields or vibration may influence the code signal and the mouse
may need to be reconnected.
1. Ensure the battery voltage is correct; if the voltage is low, replace the batteries.
2. Press the middle key(scroll wheel) to reconnect.
2.Unplug the Nano receiver and plug in the USB port again.
03
Advertisement
