Advertisement
Quick Links
SATHUNTER+
•
Turn on the SATHUNTER+ pressing
for more than five seconds, it starts in manual power off mode.
1.- DETECCIÓN
Plug the SATHUNTER+ to the antenna socket and turn the antenna until the SATHUNTER+
shows the maximum power on the display.
- 0 DG0078 -
USER'S QUICK GUIDE
:
,
or
for two seconds. If you press
or
P.5
Advertisement
Related Manuals for Promax SATHUNTER+
Summary of Contents for Promax SATHUNTER+
- Page 1 SATHUNTER+ USER’S QUICK GUIDE • Turn on the SATHUNTER+ pressing for two seconds. If you press for more than five seconds, it starts in manual power off mode. 1.- DETECCIÓN Plug the SATHUNTER+ to the antenna socket and turn the antenna until the SATHUNTER+ shows the maximum power on the display.
- Page 2 SATHUNTER+ 2.- IDENTIFICATION Press and wait until locking the signal. The display will show the parameters of the test point (name and frequency), the channel tuned and its services. To change to another stored channel press again. 3.- ADJUST Press to perform fine-tuning.
- Page 3 SATHUNTER+ • Turn off the SATHUNTER+ by pressing for tree seconds. 4.- CONFIGURATION At the DETECTION screen, press and hold until appears the configuration menu. Exits the configuration menu without saving changes. Scrolls along the menu options. Changes the parameter / Accepts. Start Spectrum: It starts the Spectrum Analyser.
- Page 4 SATHUNTER+ Message Description "LOW BATTERY" "VERY LOW BATTERY" The equipment will be switched off automatically. The LNB can be short circuit. "LNB SHORT CIRCUIT" "LNB OVER CURRENT" The LNB has a high consumption. "MANUAL POWER OFF" The instrument has to be switched off by hand. The instrument will switched off after five minutes of "AUTO POWER OFF"...
Need help?
Do you have a question about the SATHUNTER+ and is the answer not in the manual?
Questions and answers