Prune Invalid; Drc (Dynamic Range Control); Viewing Station Information; Showing Signal Strength - Hitachi KHD150E Instruction Manual

Prune Invalid

You may remove all unavailable stations from the list.
1. During DAB mode, press and hold Info/Menu, and then turn Scroll/
Select dial to select <Prune Invalid>. Press Scroll/Select to confirm.
2. Turn Scroll/Select dial to select <YES> to confirm delete. Or select
<NO> to cancel.
GB

DRC (Dynamic Range Control)

If you are listening to music with high dynamic range in a noisy
environment, you may wish to compress the audio dynamic range.
1. During DAB mode, press and hold Info/Menu, and then turn Scroll/
Select dial to select <DRC>. Press Scroll/Select to confirm.
2. Turn Scroll/Select dial to select <DRC high/low/off>. Press Scroll/
Select to confirm the setting.

Viewing Station Information

It is possible to view the information that is displayed on the display when
listening to a DAB/DAB+ program by pressing Info/Menu repeatedly.
The display will show the information through Scrolling text, Program
Type, Ensemble, Frequency, Signal quality, Signal strength, Bitrate
and Codec and Date.

Showing Signal Strength

While you selected Signal strength, a signal bar with the strength of the
current station will show on the display.
The indicator on the signal bar shows the minimum acceptable signal
level.
Stations with signal strength below the minimum signal level may not
provide a steady stream of audio.
18