Secondary Services; Full Scan; Manual Tuning - Hitachi KHD150E Instruction Manual

Secondary Services

You may see a ">>" symbol after the name of the station, this indicates that
there are secondary services available to that station. These secondary
services contain extra services that are related to the primary station. e.g.
a sports station may want to add extra commentaries. The secondary
services are inserted directly after the primary station in the station list.
To select the secondary station, press Tune/Vol. and then turn Scroll/
Select dial until you find the secondary service you want, and then press
Scroll/Select to confirm. When the secondary service ends, the unit will
automatically switch back to the primary station.

Full Scan

The full scan will search for the entire DAB Band III channels. After the scan
has finished, the first alphanumerically found station will be automatically
selected.
Full scan will not replace the DAB stations in memory. If you want to
remove all the previously scanned stations, factory reset is required.
To activate full scan, press and hold Info/Menu and then turn Scroll/
Select dial to select <Full scan>. Press the Scroll/Select button to
confirm.

Manual Tuning

Manual tuning can help add stations that were missed by full scan.
1. Press and hold Info/Menu and then turn Scroll/Select dial to select
<Manual tune>. Press Scroll/Select to confirm.
2. Press Scroll/Select to scroll through the DAB channels, which are
numbered from 5A to 13F.
3. Press Scroll/Select to select the station that you would like to listen to.
GB
17