Table Of Contents; System Information; Safety Information - Lippert Components SolidStep 3.0 Owner's Manual

System Information
Safety Information
operation
Release Steps
Storage of Steps
Adjust Leg Extension
SolidStep 3.0 Assembly
®
SolidStep 3.0 Components
®

System Information

The SolidStep® 3.0 is a trailer entry step assembly mounted to the side of any trailer, providing an ease of
entry, regardless of level ground.
Note: Step identification tags are located under one of the step extrusions, typically the top full step.

Safety information

Failure to follow the instructions provided in this manual may result in death, serious personal
injury, product or property damage or voiding of the component warranty.
Always wear eye protection when performing service or maintenance to the trailer. other safety
equipment to consider would be hearing protection, gloves and possibly a full face shield,
No repairs should be attempted by anyone other than a qualified professional. the deployment
and retraction of the step assembly can cause injury if proper precautions are not taken. the step
assembly was designed for an operational weight rating of 400 lbs.
Rev: 07.19.18

tABLe oF CoNteNtS

depending on the nature of the service.
Moving parts can pinch, crush or cut. Keep clear and use caution.
Page 2
2
2
3
3
3
3
4
5-7
CCD-0001657