Installation - Endress+Hauser nivector FTC 968 Installation And Operating Manual

Installation

The Nivector can be mounted in metal as well as in plastic
vessels.
It must, however, project into the vessel a a t t l l ea
with or without the Protector mounting adapter.
The transparent connection area cover with cable gland
can be rotated in any position.
When mounting, do not overtighten the plastic thread!
Bush G1
1
Bush G1 /
2
eas s t t 20 20 mm mm
Bush G1
Fig. 3
Left:
standard application
Right:
mounted for build-up
when on vessel wall
occurs
Fig. 4
Drilled hole
Left:
ø 35 mm or
mounted in the
bush G1
Protector to protect
against abrasion and
run-out. This remains
in the vessel when the
Nivector is removed
Right:
mounted in a flange or
directly into the vessel
wall
Thread
Fig. 5
FTC 968 only,
Mounted in an
not for dust-Ex
extension tube, e.g. for
Zone 10
vertical mounting from
above
3