Advertisement
Install the IR Illuminator Board
Before you begin, orient the front cover so that, when the IR board is installed and the cover is
replaced on the fixture, the fixture's front lable will be upright.
1. The kit ships with two
different brackets for
mounting the IR
Illuminator board. Identify
the appropriate bracket for
your fixture. Fixture with
quarter turn bezel screws
use the bracket with clips.
2. Attach illuminator board to
bracket using four M3
socket head screws (J).
3. Position the IR board over
the bracket with the
connector toward the
window.
4. Mount the IR board
assembly to the bezel using
two 3/8 phillips pan screws
(K). If using quarter-turn
style bezel, attach clips (L)
before mounting bracket.
Install the Camera Window
1. Apply adhesive label (M) to the camera window.
2. Remount the camera window assembly into the
bezel using window retainer and three 3/8
phillips pan screws (N).
J
L
60600239 Version 2.1
K
Connector
D
M
N
page 3
Advertisement
