High End Systems DL.1 Series Installation Instruction page 2

3. Mount Camera to bracket using 1/4-20 phillips screw (F). Insert 10-32 phillips pan-centering
screw (G).
4. Mount the camera module to the Fixture using four M4 socket cap screws (H). Remove lens cap
and discard.
Connect the Module cables to the Camera Interface Board
1. Connect ribbon cable to location
HD4 on the Camera Interface
board.
2. Connect Camera cable
(p/n 90409161)to location HD5 on
the Camera Interface board.
3. Attach the IR Illuminator cable
(p/n 90409178)to HD6 on the
Camera Interface board.
4. Thread the IR cable (I) through the
grommet on the front bezel plate
and behind the plate to the the side
opposite of the camera module.
Leave for connection to the IR
board assembly that will be
mounted in the front bezel cover.
I
F
G
Note:
60600239 Version 2.1
D
H
Lens Cap
HD4
The Digital Eye Technology requires a
Camera Interface Board at Version 1.3
or higher.
HD5
HD6
page 2