Safety Notes; Maintenance - Fahrenheit 28030 User Manual

EN
s n
afety
• Place the protective cover over the tip when storing such that the cover
secures the slide switch in the "OFF" position.
• Tip is hot. Do not touch. Do not immerse in water!
• After using the soldering iron, cool the iron naturally before storing away.
• Always switch off the soldering iron after use by sliding the switch to the
"OFF" position.
o
perating
• Slide the battery cover open at the end of the soldering iron.
• Place 3 x 1.5V size AA alkaline batteries into the iron as illustrated and
replace cover.
• Remove the protective cover at the tip.
• Make sure tip is securely installed.
• Slide the On/Off switch to the "ON" position.
• Hold the soldering iron like a pen.
• Press the round button on top of the On/Off switch continuously for
approx. 15 seconds.
• The tip should reach working temperature.
• To save power, only press button when actually soldering.
• The hot soldering iron should be placed standing upright with the tip
pointing up when not in use to avoid contacting the surrounding.
• After soldering, slide the switch to the "OFF" position, replace the
protective cover.
M
aintenance
• If it takes more than 30 seconds to reach working temperature, replace
the batteries.
• Use alkaline batteries for best results. Do not mix old and new batteries.
• With 3 new batteries, this soldering iron can operate continuously for
approx. 60 minutes.
• Do not change the soldering tip when hot. Use the tip exchanger provided
to remove the tip as shown.
• The soldering tip is iron-plated long life tip and therefore do not file the tip.
• If the soldering iron is not to be used for a long period of time, remove the
batteries from the soldering iron.
User Manual
otes
i
nstrUctions
www.fahrenheit-soldering.com